There are some skills in the use of electric chain hoist, which can be more handy in use. In addition, we know that the working hours of electric chain hoists are limited and cannot be used continuously for a long time. So what is the reason? Let's take a look together.

Tips for using electric chain hoist: In some workshops or workshops, it is sometimes necessary to run a relatively small distance, such as installation or docking, and the hoist needs to be slowly raised or lowered to facilitate calibration and installation. However, the electric chain hoist is mostly single-speed. Two-speed sometimes slow speed can not meet the installation speed. At this time, it can be a way of pressing a button, that is, the stop time is very short, so the moving range is relatively small, and it can be calibrated after each click. By analogy, the device is successfully installed. This is why you click to check the lifting distance when you choose the electric chain hoist. In principle, the smaller the lifting distance, the better.

When the electric chain hoist is used for a long time, the motor will keep rotating, and a certain amount of heat will be generated at this time. If the heat is not dissipated in time, the motor will become hot, so we have to let the electric hoist work for a period of time and take a rest a while. In addition, in order to ensure that the heat generated by the electric hoist can be fully dissipated, we must ensure that the fan position cannot be covered by anything when the electric hoist fan is in good working order. At the same time, the continuous operation of the electric hoist will not only make the motor hot, but many parts will be reduced due to long-term use of lubricating oil, so that there will be wear between the parts, so we can apply some lubrication between the parts when we are resting. Oil, which not only protects the parts, but also makes the work smoother.