As a kind of lifting equipment with high safety performance, explosion-proof electric chain hoist has been widely used in industrial manufacturing. You need to check these items before using the hoist.

Three steps to check the explosion-proof chain hoist

Check the voltage

We need to check the voltage of the explosion-proof chain hoist to ensure that the voltage value is not less than 10% of the rated voltage. Because the motor needs a too small torque range when it starts to start, it needs to consume a lot of electricity to be able to lift goods. So sometimes the voltage is too low to cause the equipment to fail to start normally.

When checking the equipment voltage again, we can use a multimeter and other measuring instruments to measure the relevant voltage value, but to ensure the stability of the equipment voltage.

Check if there is a missing phase

Short circuit and open circuit in the line will also cause insufficient power supply for the equipment, making the chain hoist equipment unable to operate normally. For this kind of failure, we need to conduct a detailed inspection of the circuit board of the device.

When inspecting the circuit board, it is necessary to cut off the power supply of the equipment, otherwise it will not only cause damage to the circuit board, but also threaten the safety of human life.

Check the power-off situation

After completing all the above steps, we need to check the power on of the equipment. Generally, you can use a test pen to measure, and repair the lines that cannot be connected in time.

The difference between explosion-proof electric chain hoist and normal electric chain hoist

Higher safety performance

Explosion-proof electric chain hoist has increased the explosion-proof function compared to the ordinary chain, which can effectively ensure the safety of the equipment in use, and has also been comprehensively designed in terms of structure, which not only improves its seismic performance but also reduces equipment The floor area of the hoist is more convenient to carry and the operation flexibility is stronger.

Improve efficiency

Compared with the normal electric chain hoist, the lifting speed of the explosion-proof hoist is faster, and the lifting capacity has been correspondingly improved. The explosion-proof hoist adopts a 2-stage gear design, which can effectively avoid overloading of lifting goods. The high-strength lifting chain also makes the operation of the equipment more stable.

In the above content, I have detailed the inspection steps of the explosion-proof chain hoist and the difference with the ordinary hoist. I believe these contents can effectively help you to better understand the hoist crane. If you have any questions about this, please feel free to contact us.