The electric motor of the electric chain hoist is the key component of the electric hoist for lifting heavy objects. It is the power source for the electric hoist to realize the lifting and lowering of heavy objects. A good motor can achieve a multiplier effect with half the effort. It can also be said that the motor is The heart of the electric chain hoist In the current market environment, most manufacturers set out to meet the needs of users. In order to have a better performance of the electric chain hoist, they generally use the YEJ series electromagnetic brake motor, which is what we usually say disk brake motor.

So what are the advantages of using disc brake motors for electric hoist?

First of all, the disc brake motor is a combination of a motor with basic functions and an electromagnetic brake. This motor will immediately brake and brake when it loses control power to prevent the heavy object from falling rapidly due to power failure. The dangerous behavior, with extremely high performance.

Secondly, the circuit, silicon copper sheet, stator and rotor of this disc brake motor are all made of high-quality materials, with large braking torque, accurate positioning, convenient maintenance, and it will not be easy under the conditions of frequent starting and load maintenance. There was a behavior of burning the motor. (Of course, don’t use it wrongly!)

Therefore, the manufacturers of the electric chain hoist mentioned above mostly use the disc brake motor as the electric motor of the electric chain hoist.

Whether the electric motor of the electric chain hoist is used correctly or not will directly affect the service life of the electric chain hoist and our work efficiency. Next, we will introduce the common sense of the use of the electric motor.

  1. The operating environment temperature should not be too high, otherwise it will speed up the temperature of the motor and speed up the pace of scrapping.
  2. The operating environment should not be humid, otherwise the motor is charged during operation, and power-on accidents are prone to occur.
  3. The power supply voltage should not be too high or too low. It will harm the use of the motor without benefit, and will only speed up its elimination.
  4. The motor is of intermittent working nature. The working time should not be too long. After working for a period of time, take a break. Reasonable operation will not affect our work progress.
  5. The working speed of the motor should be stable, and frequent replacement of the speed frequency is prohibited.

I hope this article is helpful to you.